Mitsubishi Heat Pump Installers Near Me: Adirondack Heat Pumps in Ticonderoga, NY
Quick answer: if you are searching "Mitsubishi heat pump installers near me" from Ticonderoga, Crown Point, Hague, Schroon Lake or Port Henry, the local answer is Adirondack Heat Pumps — a Mitsubishi Electric Diamond Contractor ELITE with a showroom at 15 Montcalm Street in Ticonderoga. We design, install and service Mitsubishi Hyper-Heat systems across Essex County, the Champlain Valley and the Lake George region, file your NYS Clean Heat rebate paperwork, and back every install with a 12-year parts-and-labor warranty and a 180-Day Comfort Guarantee.
Why Mitsubishi Hyper-Heat is the right fit for the Adirondacks
A search for installers usually turns up a maze of regional chains, one-truck operators and furnace companies that added heat pumps last year. We went the other way: since opening in Ticonderoga in 2022, Mitsubishi Electric cold-climate equipment has been our specialty, because it is the equipment that actually works at -10°F.
- Hyper-Heat (H2i) technology: 100% rated heating capacity at 5°F, operation to -13°F, and down to -22°F on H2i Plus models. Ticonderoga's design temperature is about -10°F, so the system carries the house without oil or propane backup.
- Lower bills: a heat pump moves heat instead of making it, so most homes coming off oil, propane or electric baseboard cut heating spend significantly. Run your numbers in our savings calculator.
- One system, both seasons: the same equipment is high-efficiency air conditioning in July — no more window units.
- Quiet: indoor units as low as 19 dB; ideal for bedrooms, lakefront camps and home offices.
- No combustion: no carbon monoxide, no fuel tank, no chimney, no delivery truck in the driveway.
- Rebate-eligible: NYS Clean Heat incentives through NYSEG and National Grid, and Efficiency Vermont for our Addison County customers. We confirm your exact amount at the free estimate.
The Adirondack Heat Pumps difference
Local expertise
We know Ticonderoga's housing stock — 1800s village homes on Lake George Avenue, drafty farmhouses out Route 9N, compact camps on Lake Champlain and newer builds in Hague and Putnam. Every system is designed for the specific house, never pulled off a square-footage chart.
Diamond Contractor ELITE certification
Our technicians are factory-trained by Mitsubishi Electric. That training is what gets you correct sizing from a room-by-room load calculation, installation to the manufacturer's specification, and the 12-year parts warranty that only Diamond Contractor ELITE installs qualify for. Labor is covered through the Adirondack Shield Elite Care Plan.
Transparent, written estimates
Your free estimate includes the equipment we recommend and why, the projected operating cost versus your current fuel, every rebate applied, and financing options — 18 months at 0% interest through Synchrony on approved credit. See our Mitsubishi heat pump pricing page for typical ranges.
How a Mitsubishi installation works with us
Free in-home consultation
We walk the house, measure rooms, check insulation and windows, look at the electrical panel and talk through how you live in the home.
Custom system design
We size each zone and pick the right indoor styles — wall-mounted, floor-mounted, ceiling cassette or ducted air handler — and the H2i outdoor unit to match.
Professional installation
Indoor units mounted, outdoor unit set on a stand above the snow line, line sets run in finished line-hide, electrical connected by a licensed electrician, system evacuated and charged to spec. Most homes take one to three days.
Walkthrough and app setup
We show you the remote, the MHK2 thermostat if you have one, and set up the Mitsubishi Comfort app so you can control zones from your phone.
Full detail on our installation process page.
Mitsubishi vs. oil, propane and central AC
| Factor | Oil or propane furnace/boiler | Central AC | Mitsubishi Hyper-Heat |
|---|---|---|---|
| Fuel cost stability | Swings with world markets every winter | — | Electricity; pairs with solar |
| Heating and cooling | Heat only | Cooling only | Both, in one system |
| Zoning | One thermostat | One thermostat | Room-by-room |
| Maintenance | Annual cleaning, nozzles, chimney | Annual service | Rinse filters; annual tune-up |
| Safety | Combustion, CO, tank | — | No combustion |
| Lifespan | 15–25 years | 12–15 years | 15–20 years with care |
Three myths we hear in Ticonderoga
"Heat pumps don't work in cold climates." Standard ones struggle. Hyper-Heat was built for exactly this region, and we have systems running as primary heat in Newcomb, Keene and Lake Placid.
"They're too expensive." After NYS Clean Heat rebates and the savings on fuel, payback is often shorter than homeowners expect — and 0% financing means the monthly payment frequently lands below the old oil bill.
"They're complicated." A handheld remote, a wall thermostat or the phone app. Simpler than most programmable thermostats.
What local customers say
From our Google reviews: Sytske Martin switched a 200-year-old Adirondack house from oil — "our house has never been so warm… from planning to rebates and financing through the state, the folks at ADK Heat Pumps made it possible." William Morris wrote that "Josh and Matt are superb technicians and craftsmen who take great pride in the quality of their work… there is a reason that ADK Heat Pumps is a Diamond rated installer by Mitsubishi." Read more on our reviews page.
Where we install
From our Ticonderoga office we serve Ticonderoga, Crown Point, Port Henry & Moriah, Hague, Schroon Lake, Putnam, Whitehall, the Lake George basin, the High Peaks towns and Addison County, Vermont across the lake. See the full list on our service areas page. When you need service five winters from now, we will still be on Montcalm Street.
Frequently asked questions
Are Mitsubishi heat pumps efficient in Ticonderoga winters?
Yes. Hyper-Heat models deliver 100% of rated heating capacity at 5°F and keep running to -13°F; H2i Plus models operate to -22°F. Ticonderoga's design temperature is about -10°F, so a correctly sized system heats the home without fossil-fuel backup.
How long does a Mitsubishi installation take?
A single-zone system is usually done in one day. Multi-zone and whole-home conversions typically take one to three days depending on the number of indoor units and line-set routing.
Can a heat pump replace my oil or propane furnace completely?
In most Adirondack homes, yes. Many of our customers remove the oil tank entirely. Some choose to keep an existing boiler or a wood stove as a backup for peace of mind; our load calculation tells you which path fits your house.
What rebates are available in 2026?
NYS Clean Heat rebates are paid through NYSEG and National Grid on qualifying cold-climate installs, and Efficiency Vermont offers incentives across the lake. Amounts depend on your home and program tier; we confirm what you qualify for and file the paperwork. There is no federal tax credit in 2026 — that program ended December 31, 2025.
How much does a Mitsubishi heat pump cost installed?
It depends on the number of zones and the home. Single-zone systems are the least expensive; whole-home multi-zone conversions are a larger investment offset by rebates and fuel savings. Our estimate is free and includes every incentive.
Talk to us
Ready to stop paying for oil or propane? Stop by the showroom at 15 Montcalm Street or reach us at info@adirondackheatpumps.com. Call (518) 812-1958, request a free in-home estimate, or run the two-minute savings calculator first — finish it before your estimate and we take $250 off the install.