Heating season is here in the North Country. Free in-home estimates booking now · NYS Clean Heat rebates available for 2026–27 installs.Get a free estimate →
24/7Answered 24/7(518) 812-1958
Heat pumps & Hyper-Heat

Efficient and Eco-Friendly: The Benefits of Converting to Mitsubishi Electric's Hyper-Heating Technology

Quick answer: converting a North Country home from oil, propane or electric baseboard to Mitsubishi Hyper-Heating cuts the heating bill, adds air conditioning, removes combustion from the house and qualifies for NYS Clean Heat rebates. Hyper-Heating INVERTER (H2i) equipment delivers 100% of its rated heat at 5°F and keeps operating to -13°F, with H2i Plus models reaching -22°F, so the conversion is a full replacement of the old system rather than a supplement. The process is a free in-home load calculation, a written price with rebates applied, and typically a one- to three-day installation.

Woman wrapped in a blanket beside an old radiator before converting to a heat pump

What a heat pump is

A heat pump moves heat rather than making it. In winter it absorbs heat from the outdoor air and transfers it inside; in summer it reverses and pushes indoor heat outside. Because moving heat takes far less energy than generating it, a heat pump uses a fraction of the electricity that resistance heat would, and it does both heating and cooling from one piece of equipment. See what is a heat pump for the full explanation.

What Mitsubishi Hyper-Heating technology is

Standard heat pumps lose capacity as the outdoor temperature drops, which is why they earned a bad reputation in the Northeast. Mitsubishi's Hyper-Heating INVERTER changes that with three pieces: a variable-speed inverter compressor that speeds up as it gets colder, a flash-injection refrigerant circuit that lets the compressor run hard without damage, and a smart defrost cycle that clears frost from the outdoor coil only when needed. The result is 100% of rated heating capacity at 5°F, continued operation to -13°F, and -22°F on H2i Plus models. For Ticonderoga, with a design temperature around -10°F, that is a primary heating system, not a shoulder-season helper.

The benefits of converting

  • Lower energy bills. Roughly three units of heat per unit of electricity, no fuel deliveries, and zoning so unused rooms are not heated. Run your own numbers in the savings calculator.
  • Consistent comfort in deep cold. The inverter holds a steady room temperature instead of the swing of a boiler cycling on and off, and it keeps delivering at -10°F.
  • Air conditioning included. The same system cools and dehumidifies in July. For most North Country homes this is the first central cooling they have ever had.
  • Cleaner and safer. No combustion, no carbon monoxide, no oil tank, no chimney. Washable filters clean the air in every room.
  • Space saving. One outdoor unit and compact indoor units replace a furnace, a tank and a separate air conditioner.
  • Long life. 15 to 20 years with annual maintenance, backed by a 12-year parts warranty on Diamond Contractor ELITE installs and labor through Adirondack Shield.
  • Quiet. Indoor units as low as 19 dB.

How the conversion works

  1. Free in-home evaluation

    A Comfort Consultant walks the house, looks at the existing system, insulation and electrical panel, and runs a room-by-room load calculation.

  2. Design and written price

    We choose indoor unit styles room by room (wall, floor, cassette, ducted), size the outdoor unit(s) to your heat loss at the local design temperature, and give you an itemized price with NYS Clean Heat or Efficiency Vermont rebates applied and 0% financing available.

  3. Installation

    Most ductless conversions take one to three days. We mount the outdoor unit on a stand or wall bracket above snow depth, run line sets in covered channels, set each indoor unit, pull a vacuum, charge the system and commission every zone. If your home has sound ductwork, a ducted air handler can replace the furnace directly.

  4. Walkthrough and paperwork

    We show you the remote and the Mitsubishi Comfort app, register the warranty, and file the rebate.

  5. The old system

    Keep the boiler as a backup for the first winter if you like; many customers never turn it on again. Removing an oil tank is a separate decision we talk through with you.

Who benefits most

The largest savings go to homes on electric baseboard and propane, where the cost per delivered BTU is highest. Oil-heated homes see strong savings and the comfort benefit of zoning. Seasonal camps converting to year-round use get heating and cooling in one install. And any home without ducts gets air conditioning without tearing walls open. See how a whole-home conversion is designed, or read what oil-heated customers say in our reviews: one 200-year-old Adirondack house "has never been so warm."

2026 rebates for converting

NYS Clean Heat pays incentives through NYSEG and National Grid for qualifying cold-climate heat pumps, with higher tiers in some cases when the fossil-fuel system is removed. Efficiency Vermont and Vermont utilities cover Addison County. The federal home-energy tax credit ended December 31, 2025, so the state and utility programs are what count now. We confirm your exact amount at the estimate and handle the filing. Details on rebates and savings.

Frequently asked questions

Is converting to a heat pump worth it in the Adirondacks?

For most homes on oil, propane or electric baseboard, yes. Mitsubishi Hyper-Heating delivers full capacity at 5°F and operates to -13°F or -22°F, cuts heating cost, adds air conditioning and qualifies for NYS Clean Heat rebates.

Do I have to remove my furnace or boiler to convert?

No. Many homeowners keep the old system as a backup the first winter. Some rebate tiers pay more when it is decommissioned, which we review with you.

How long does a Hyper-Heating conversion take?

Most ductless conversions take one to three days. A ducted air handler replacing a furnace on existing ductwork is usually one to two days.

Will a Mitsubishi system keep up on a -20°F night?

Standard H2i equipment operates to -13°F and H2i Plus to -22°F. We size to your home's heat loss at the local design temperature and discuss backup for the rare colder nights in the High Peaks.

Talk to us

Have questions about your home? Call Adirondack Heat Pumps at (518) 812-1958, stop by the showroom at 15 Montcalm Street in Ticonderoga, or request a free in-home estimate. We serve Essex County, the Lake George and Lake Champlain shores, the High Peaks and Addison County, Vermont.

NYS Clean Heat · Efficiency Vermont

Rebates Available

North Country homeowners switching from oil, propane, wood or electric baseboard to a Mitsubishi cold-climate heat pump qualify for NYSEG or National Grid rebates through NYS Clean Heat, and Addison County, Vermont homes qualify through Efficiency Vermont plus utility bonuses. Rebate amounts change by program and tier — we tell you exactly what your home qualifies for at the free in-home estimate and handle the entire application for you.

See what you qualify for
Free 2-minute calculator · $250 off your install when you complete it

What is your oil, propane or electric heat really costing you?

Enter your ZIP, home size and current fuel. See your real annual cost, what a Mitsubishi Hyper-Heat system would cost to run in North Country weather, and your 5-year cost of doing nothing.

Not sure how it would look? Snap a photo and see a Mitsubishi unit on your wall — free, 60 seconds.

  • Your number, not an average. Modeled on your ZIP's heating degree days, your fuel price and your system's age.
  • Three paths compared. Single-zone, hybrid with your existing furnace or boiler, or whole-home Hyper-Heat.
  • Rebates confirmed for you. We tell you exactly what NYS Clean Heat or Efficiency Vermont will pay at the free estimate and handle the application.
  • Emailed to you with a $250 code. Keep the report. Nobody calls unless you ask us to.
Call 24/7(518) 812-1958 Text usQuick reply Free EstimateChat / online